How To Remove Liquor Security Cap

Download Article

Download Article

Some booze bottles, particularly Mexican tequila, have a congenital-in stopper in the neck. The idea is to slow the pouring speed and foreclose spills. However, some people detect these stoppers annoying because the alcohol won't come out unless you lot pour information technology in a specific way. The stopper likewise makes refilling the bottle impossible. You tin ready the issue by taking off the stopper. These stoppers aren't designed for removal, so y'all'll accept to carefully cutting it off the bottle. When you remove it, you lot tin can reseal the bottle and savor uninterrupted pours in the futurity.

1. i

   Unscrew the bottlecap. Y'all won't be able to take the stopper out with the cap on. Accept it off and put it to the side. Make sure to piece of work on a flat, solid surface. Otherwise you could spill the liquor while you work.^[one]

   • On some bottles, the cap screws onto the stopper part. This ways that you won't be able to reattach the cap if you lot remove the stopper.

2. 

   2

   Insert a knife underneath the metal wrapping effectually the bottleneck. Use something with a thin bract, similar a utility or razorblade knife. Tuck it between the metal wrapping around the bottleneck.^[2]

   • It doesn't affair if yous insert the pocketknife on the height or bottom of the wrapper.
   • Be very careful when using a knife. Cut away from yourself and vesture gloves to avoid cuts.

   Advertising

3. 

   3

   Piece through the wrapping from tiptop to bottom. Piece the wrapper all the way downward. So pare it off completely.^[3]

   • On some bottles, the wrapper is thick plastic instead of thin metal. This might take a fleck more effort, but you can slice it off the same way.

4. 

   4

   Cut off the tabs securing the stopper to the bottle. The stopper has plastic tabs around its border that secure information technology. Take the knife and insert it into each tab, and so slice through them. Work your way around the stopper to release all the seals.^[four]

   • Yous can as well apply scissors to cut the tabs. This may be easier for yous, and in that location'south less adventure of cutting yourself.

5. 

   5

   Elevator the stopper out of the bottle. With the tabs cut, the stopper should pop out of the bottleneck. Pull it upwardly to remove it completely.^[5]

   • Be careful when you pull the stopper out. There won't be anything keeping the liquor in and then you could spill information technology if you tip the bottle.
   • If the stopper is stuck, try using a pair of pliers to pull it out.

Advertizement

1. 

   1

   Plug the bottle with a cork that fits into the clogging. If you lot have an extra cork laying around, then this could be the perfect way to reseal the bottle. Push it into the bottleneck to end upwardly the bottle and prevent the alcohol from spilling out.^[6]

   • Don't use a cork that doesn't properly fit the bottle. If it's too modest, the bottle will spill.
   • You lot can as well buy corks online if y'all don't have whatever extras.

2. 2

   Insert a metal or plastic canteen stopper. While these stoppers are normally used for wine bottles, they can seal up a liquor canteen as well. Search online for a blazon that fits the bottle. Then slide information technology into the bottleneck to create a seal.^[7]

   • Some stoppers don't grade a tight seal, so the liquid could leak out if the bottle is on its side. E'er shop it correct-side up to avoid spills.
   • These stoppers can be decorative likewise, and some have shapes or figures on elevation.

3. 3

   Transfer the booze to a decanter if y'all can't reseal the bottle. A decanter is a drinking glass container designed to concord and seal alcohol. Insert a funnel into the decanter neck and pour the alcohol into it. This is a good style to keep your alcohol if you have trouble resealing the original canteen.^[8]

   • As long every bit the decanter has a good seal on it, the alcohol should last as long as it would in the original canteen.

Ad

Inquire a Question

200 characters left

Include your email address to go a bulletin when this question is answered.

Submit

Advertisement

Things Y'all'll Need

• Knife
• Pliers

• These stoppers are common in Mexico and South America. Many people discover that the bottles they bought on vacation accept stoppers and they don't know how to pour the liquor.

• Y'all can still pour the alcohol with the stopper on. On nearly bottles, turn it entirely upside downwardly and milkshake the canteen slightly. This should release the alcohol and you won't have to intermission off the stopper.

Thanks for submitting a tip for review!

Advertisement

• Ever be careful when you lot're using a knife. Cut away from yourself and wear gloves and so you don't get cutting.

• Don't try to pry the stopper off. Yous could break the drinking glass.

Advert

Near This Article

Thanks to all authors for creating a page that has been read 177,919 times.

Did this article help yous?

Source: https://www.wikihow.com/Remove-an-Alcohol-Bottle-Stopper

Share this post